รถเข็น

RODE NT1 + AI-1 Complete Studio Kit

พร้อมส่ง
รหัสสินค้า
NT1/AI1KIT
฿16,400.00

ชุดไมโครโฟนสำหรับงานบันทึกเสียง RODE NT1/Ai1 Kit Complete Studio Kit with Audio Interface , ในชุดประกอบด้วย ไมโครโฟน RODE NT1 1 ตัว, USB Audio Interface RODE Ai-1 1 เครื่อง ชุด Shockmount RODE SMR 1 ชุด, สายไมโครโฟนแบบ Premium XLR Cable 1 เส้น และสาย USB 1 เส้น

RODE NT1 + AI-1 Complete Studio Kit
RODE NT1 + AI-1 Complete Studio Kit RODE NT1 + AI-1 Complete Studio Kit RODE NT1 + AI-1 Complete Studio Kit

1. RODE NT1 Cardioid Condenser Microphone

The RODE NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE’s HF6 1″ capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone’s electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

2.SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element. 

The SMR’s removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR’s clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.

The SMR’s frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.  A base nut is also included, suitable for all compatible Rode microphones.

3.AI-1 Studio-Quality USB Audio Interface

The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4″ input with phantom power, two balanced 1/4″ monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

ข้อมูลเพิ่มเติม
คุณสมบัติ
  • AI-1 Studio-Quality USB Audio Interface
    Analog Inputs and Outputs Input: 1 x Neutrik XLR-1/4″ / 6.35 mm combo
    Outputs: 2 x 1/4″ / 6.35 mm (impedance balanced), 1 x 1/4″ / 6.35 mm (headphones)
    Computer Connectivity USB Type-C
    Form Factor Desktop
    Mic Preamps 1
    Phantom Power Yes
    Bit Depth 24-bit
    Sample Rates 44.1, 48, 88.2, 96 kHz
    Zero-Latency Direct Monitoring Yes
    USB Bus Powered Yes
    OS Requirements Mac OS X 10.10 or later
    Windows 7 or later
    Dynamic Range 104 dBu
    Equivalent Noise Equivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
    Frequency Response 20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
    Gain Range 0 to 45 dB
    Input Impedance XLR Mic Input: 1.3 kOhms
    Instrument Input: 0.9 MOhms
    Monitor Outputs Max Output Level: -6 dBu
    Headphone Output Max Output Power (at 1% THD):
    32 Ohms, 24 mW,
    300 Ohms, 245 mW
    Dimensions (D x W x H) 3.9 x 4.9 x 1.5″ / 100.0 x 124.0 x 38.0 mm
    Weight 19.8 oz / 561.3 g
  • NT1 Cardioid Condenser Microphone (Microphone Only)
    Analog Performance
    Operating Principle Pressure Gradient
    Transducer Condenser
    Diaphragm 1″ / 25.40 mm
    Polar Pattern Cardioid
    Frequency Range 20 Hz to 20 kHz
    Equivalent Noise Level 4 dB A-Weighted
    Maximum SPL 132 dB SPL
    THD 1%
    Impedance 100 Ohms
    Sensitivity -29 dB
    General
    Output Connectors 1 x 3-Pin XLR
    Operating Voltage 24 V
    48 V
    Length 7.36″ / 187 mm
    Diameter 1.97″ / 50 mm
    Weight 0.97 lbs / 440 g
    Packaging Info
    Box Dimensions (LxWxH) 9.1 x 5.5 x 3.4″
  • SMR Advanced Shock Mount for Large Diaphragm Condenser Mics
    Dimensions 5.0 x 9.0 x 8.3″ (130 x 220 x 210 mm)
    Weight 9.2 oz (260 g)
    Packaging Info
    Box Dimensions (LxWxH) 10.158 x 7.795 x 4.803″
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:RODE NT1 + AI-1 Complete Studio Kit