รถเข็น

RODE NT1KIT

พร้อมส่ง
รหัสสินค้า
NT1KIT
฿13,200.00

ไมโครโฟนบันทึกเสียง Rode NT1 Kit เป็นไมโครโฟนชนิด Condenser มีทิศทางการรับเสียงแบบ Cardioid ตอบสนองความถี่ที่ 20 Hz to 20 kHz Impedance 100 ohms พร้อม Shockmount

 

 

 

 

RODE NT1KIT
RODE NT1KIT

Rode NT1 Kit Condenser Microphone (Kit with SMR Shockmount)

ไมโครโฟนบันทึกเสียง Rode NT1 Kit เป็นไมโครโฟนชนิด Condenser มีทิศทางการรับเสียงแบบ Cardioid ตอบสนองความถี่ที่ 20 Hz to 20 kHz Impedance 100 ohms พร้อม Shockmount

The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE’s HF6 1″ capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone’s electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

Features:

  • NT1 Microphone Kit with Shockmount
  • HF6 1″ Capsule
  • Rycote Lyre Internal Shockmount
  • Low Self-Noise for Quiet Operation
  • Nickel-Plated Aluminum Body
  • Scratch-Resistant Ceramic Outer Layer
  • RM2 Mic Clip
ข้อมูลเพิ่มเติม
คุณสมบัติ

 

 

 

Operating Principle Pressure Gradient
Transducer Condenser
Diaphragm 1″ (25.40 mm)
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Equivalent Noise Level 4 dB A-Weighted
Maximum SPL 132 dB SPL 1%
Impedance 100 ohms
Sensitivity -29 dB, re: 1 V/Pa
Power Requirements 24 V, 48 V
Output Connectors 3-Pin XLR

General

 

Length

7.36″ (187 mm)

Diameter

1.97″ (50 mm)

Weight

0.97 lb (440 g)

 

 

 

 

เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:RODE NT1KIT