sE Electronics V Kick
ไมค์กลอง sE Electronics V Kick เป็นไมค์สำหรับมิกซ์กระเดื่องกลอง แบบไดนามิค มีรูปแบบการรับเสียงแบบ Supercardioid Pickup Pattern, 2 Tone-Shaping Switches on Rear of Mic, Capsule is Decoupled from Housing, Built-In Windscreen for Plosives ตอบสนองความถี่ 20 Hz to 19 kHz
****กรุณาเช็คสต็อคสินค้าก่อนสั่ง LINE : @music2home
The sE Electronics V Kick is a dynamic microphone with a supercardioid polar pattern. It’s intended to be quite versatile, with four different tonalities thanks to two switches mounted on the rear of the mic. One switch controls the frequency content of the midrange, while the other changes the high-frequency capture of the V Kick.
Thanks to these switches, you can secure a rounded midrange with a softer high end, a scooped midrange with a defined high end—or the complete opposite: A scooped midrange with a softer high-end, or a round midrange with a softer high end. This allows you to use the mic with all sorts of styles of kick drum, from big-band jazz to aggressive metal. The same is true for basses. You can tailor this mic for something that complements a round, vintage Ampeg tone, or a more modern back-pickup style.
These switches are positioned on the rear of the mic, and this helps with live-sound functionality. With different bands switching their instruments between sets, this mic can be of service in keeping changeover time to a minimum in club venues.
At the heart of the V Kick is its DMC7 SB capsule, which utilizes an aluminum voice coil for a transient-rich sound and a bottom end extending low enough to record the fundamental frequencies of kick drums and basses. Its supercardioid pickup pattern ensures little bleed, helping you isolate the sound-source from other drums or cymbals. The capsule is suspended inside the mic to keep it decoupled from mechanical vibration, shocks, jolts, and other issues.
The mic’s all-metal housing is rugged, making the mic suitable for live use on the road. A gold-plated XLR connector helps to provide a reliable signal connection. With a windscreen built into the mic, it’s already internally protected against winds, plosives, and extraneous noise. A black windscreen and a knurled nut for third-party mounting kits are included.
- Two switchable voicings provide four different sonic options
- Extremely low profile for effortless placement inside the drum
- Innovative aluminum voice coil for detailed lows and crystal-clear highs
- Patented internal shockmount eliminates the need for an external one
- Sophisticated supercardioid capsule design for superior isolation and rejection
- Internal windscreen efficiently reduces unwanted wind noise and plosives
- Robust, all-metal chassis construction—built for the road
|Frequency Range||20 Hz to 19 kHz|
|Impedance||Supercardioid: 300 Ohms|
|Load Impedance||1 kOhms|
|Sensitivity||Supercardioid: 0.2 mV/Pa
Supercardioid: 0.4 mV/Pa
|Output Connectors||1 x 3-Pin XLR|
|Length||5.31″ / 135 mm|
|Diameter||2.36″ / 60 mm|
|Weight||16.51 oz / 468 g|
|Package Weight||1.515 lb|
|Box Dimensions (LxWxH)||10.9 x 5.3 x 3.1″|