รถเข็น

Tascam US-2x2HR

พร้อมส่ง
รหัสสินค้า
US-2x2HR
฿5,990.00

2-in/2-out USB-C Audio Interface with 2 x XLR Combo Inputs, MIDI, and Software Bundle - Mac/PC/iOS.

****กรุณาเช็คสต็อคสินค้าก่อนสั่ง LINE : @music2home

Tascam US-2x2HR
Tascam US-2x2HR Tascam US-2x2HR Tascam US-2x2HR Tascam US-2x2HR Tascam US-2x2HR

The TASCAM US-2x2HR USB-C audio/MIDI interface (PC/Mac/iOS) brings rich 192kHz audio, dependable 5-pin MIDI in/out, and super-low-latency tracking and monitoring to your home or mobile studio setup. The US-2x2HR's two onboard Ultra-HDDA mic preamps give you 57dB of clean gain to capably drive most dynamic mics and onboard +48V phantom power to support your studio condensers. Each preamp features a combo TRS/TS 1/4-inch input with Mic/Line-Inst selector to simultaneously capture a rhythm guitar, bass, or keyboard as you track vocals. You also get MIDI in and out for interfacing with your keyboard controllers and drum machines. Perhaps best of all, the TASCAM US-2x2HR delivers all of these features over USB bus power — just a single USB-C cable (included) from your laptop to your interface is all you need for power and connectivity. As for monitoring, the TASCAM US-2x2HR gives a 1/4-inch headphone out and stereo 1/4-inch line outs, each with independent level controls so you can mix projects on loudspeakers or your favorite studio cans. If you're looking for a USB-C interface that's equally at home in the studio or on the road, the TASCAM US-2x2HR USB-C audio/MIDI interface from Millionhead is worth a look.
 

2 x Ultra-HDDA mic preamps

The TASCAM US-2x2HR gives you two Ultra-High Definition Discrete Architecture (Ultra-HDDA) mic preamps to capture audio with extremely low self-noise and home in on every detail in your musical performances. The US-2x2HR dual preamps open up the possibility of stereo miking and near-far cab mic placements. And since each combo input can also accept a 1/4-inch TS or TRS connection, you can easily track guitars, keyboards, and line-level audio gear.

Supports sample rates up to 192kHz

Capturing audio in future-resistant 24-bit/192kHz quality is no problem when you've got the TASCAM US-2x2HR in tow. Higher sample rates means potentially greater top-end detail on vocals, acoustic guitars, and more.
 

Super-low latency

High levels of latency — the time it takes for an audio interface to convert your analog signal to digital as it enters your computer and back again in the form of sound — can render even the best interfaces practically unusable. Fortunately, this is no concern with the TASCAM US-2x2HR. The latest drivers give you latency as low as four samples over its rock-solid USB-C connection. In other words, you can monitor yourself through headphones with no trace of delay as you pour your heart into a performance.

Software bundle included

Whether you're new to digital recording or not, the TASCAM US-2x2HR's included software bundle is a major value add. This bundle includes licenses to Cubase LE (Mac/PC) and Cubasis LE (iOS), two great platforms for capturing music on the move. Cubase LE provides a cutting-edge music production studio, giving users what they need to get started creating music. Cubasis LE is a compact version of Cubase for your iPad, providing the same look as its bigger sibling.

Features:

  • Mac, PC, and iOS compatible USB-C interface
  • Sleek and modern design
  • Rock-solid recording at home or on the road
  • Captures audio in sample rates up to 192kHz
  • Super-low latency — as low as 4 samples
  • Bus powered — a single USB-C cable supplies power and connectivity from a laptop
  • 2 x Ultra-HDDA microphone preamplifiers with 57dB of gain
  • +48V phantom power for condenser microphones
  • 1/4-inch combo jacks accept guitars, keys, or line-level audio signals
  • Stereo 1/4-inch line outputs feed your studio monitors
  • 5-pin MIDI in/out for interfacing with studio controllers
  • Headphone output with volume control provides zero-latency monitoring while you track
  • Power supply included
  • Includes licenses for Cubase LE and Cubasis LE
 
ข้อมูลเพิ่มเติม
คุณสมบัติ
Sampling frequency 44.1k/48k/88.2k/96k/176.4k/192k Hz
Quantization bit rate 24bit
Analog audio inputs
MIC IN IN 1 / IN 2
Connector XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
Input impedance 2.2k ohms
Maximum input level
(GAIN:MIN)
+9dBu (2.183Vrms)
Gain 56dB
INST IN IN 1 / IN 2
Connector 6.3mm(1/4")TS-jack(T:HOT, S:GND), UNBALANCED
(When set to "INST" at MIC/LINE INST switch)
Input impedance 1M ohms or more
Maximum input level
(GAIN:MIN)
+10dBV(3.162Vrms)
Gain 56dB
LINE IN IN 1 / IN 2
Connector 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
(When set to "MIC/LINE" at MIC/LINE INST switch)
Input impedance 10k ohms
Maximum input level
(GAIN:MIN)
+20dBu(7.746Vrms)
Gain 56dB
Analog audio outputs
LINE OUT 1-2
Connector 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
Output impedance 210 ohms
Nominal output level +4dBu (1.228Vrms)
Maximum output level +20dBu (7.746Vrms)
PHONES
Connector 6.3mm(1/4") stereo phone jack
Maximum output level 18mW+18mW or more
(THD+N 0.1% or less, 32ohms loaded)
MIDI IN /OUT
Connector Din 5-pin
Format Standard MIDI format
USB
Connector USB Type-C
Format USB2.0 HIGH SPEED (480Mbps)
Power
When connected PC USB bus powered
AC Adapter (TASCAM PS-P520E, sold separately)
When connected iOS/iPadOS AC Adapter (TASCAM PS-P520E, sold separately)
Power consumption 1.75W
Dimensions 186(W) × 65(H) × 160(D)mm (including protrusions)
Weight 2.43lb (1.1kg)
Operating temperature 5 to 35°C
Accessories USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner's Manual (including warranty)

เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:Tascam US-2x2HR