Focusrite iTrack Solo
2x2 iOS Audio Interface with Lightning Connector, 1 x Mic Input, 1 x hi-Z Input, Direct Monitoring, and Monitor Volume Control
Audio Interface รุ่น iTrack-Solo สำหรับ iPad, PC และ Mac มาพร้อมเทคโนโลยีล่าสุดของ Focusrite ในราคาพิเศษ
Audio interface for iPad, PC and Mac - featuring a Focusrite mic-preamp and instrument input
Focusrite quality – for your iPad
iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone pre-amplifier and an input to record directly from electric and bass guitars, iTrack Solo is the perfect way to expand the audio capabilities of your iPad using Garageband or any other music-making app.
Although it is an Apple certified "Made for iPad" device, iTrack Solo is also fully compatible with your PC or Mac computer and comes with a host of free music making software including Ableton Live Lite and the Focusrite Scarlett Plug-in Suite.
Front panel
- 1 microphone input - XLR
- 1 Instrument input ¼’ unbalanced
- 2 Gain knobs
- 2 Gain halo signal indicators
- 48V Phantom power switch
- Direct monitor switch
- Large monitor level dial (controls headphone and line level outputs)
- USB Connection LED indicator
- Headphone output ¼’ TRS Jack
Rear panel
- 2 unbalanced monitor outputs - RCA Phono
- DEVICE LINK port (to connect iTrack Solo to iPad)
- USB 2.0 Port
- Kensington Lock slot
Included software
- Ableton Live Lite 9 - professional music making software to use your iTrack Solo with a Mac or PC.
- Focusrite Scarlett plug-in suite - collection of software plug-ins bringing effects to your music software (like Ableton Live for example).
Analogue Input Performance
Mic
Frequency Response 20Hz - 20kHz +/- 0.2 dB
THD+N < 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN) < -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
Gain Range +10dB to +55dB
Max Input Level +4dBu
Instrument
Frequency Response 20Hz - 20kHz +/- 0.2dB
THD+N 0.003% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise -87dBu (22Hz/22kHz bandpass filter)
Gain Range -10dB to +55dB
Max Input Level +2dBu
Analogue Output Performance
Nominal Output Level 0dBFS = 10dBu, unbalanced
Frequency Response 20Hz - 20kHz +/- 0.2dB
THD+N < 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Digital Performance
Clock sources Internal clock only
A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB
D-A Dynamic Range 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz - Mac and PC
44.1 KHz, 48 KHz - iPad
Crosstalk
Input to Input Better than 90dB
Output to Output Better than 90dB
Input to Output Better than 85dB
Input Metering
Ring LED lit Green Signal present (-24 dBFS)
Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height 45 mm / 1.77'
Width 150 mm / 6'
Depth 100 mm / 4'
Weight 500 g / 1 lb
In the box
- iTrack Solo
- 1.2m USB cable
- 1.2m "DEVICE LINK" cable (to connect to a 30 pin iPad)
- Getting started guide
- Registration card
- Download card for Ableton Live Lite / Scarlett Plug-in Suite
- USB power supply (US only)
Compatible iPads
- iTrack Solo Lightning: Any iPad with Lightning connector.
- Standard iTrack Solo: iPad (1st gen), iPad (2nd gen) and iPad (3rd gen)