W2319

W2524

Most musical instrument sound pick-ups, for example those in electric guitars, are comprised of high impedance circuits driven mainly by voltage, with very little electrical current flow. That is why handling noise (microphonics) can be a problem for guitar cables. Microphonic noise is caused by the minute voltage generated when a cable is flexed, stepped on, etc. Guitar cables must be designed to prevent this, so a conductive PVC layer is placed under the shield conductor to drain away this voltage. Note: This conductive layer must be stripped back when wiring, or a partial short will result.

SPECIFICATIONS

Configuration
Part No.		W2319	W2524
Conductor	Details	12/0.18TA	50/0.12A
	Size(mm)	0.305mm (#23AWG)	0.565mm (#20AWG)
Insulation	Ov. Dia.(mm)	1.6 (0.063")	2.7 (0.106")
	Material	PE
	Color	Clear
Sub-Shield	Ov. Dia.(mm)	1.8? (0.071")	3.3? (0.130")
	Material	Conductive PVC (Carbon PVC)
	Color	Black
Main-Shield	Served-Shield	Approx. 38/0.16TA	Approx. 55/0.18A
Jacket	Ov. Dia.(mm)	5.0 (0.197")	6.0 (0.236")
	Material	PVC
	Color	Black
Roll Sizes		100m (328Ft)	100m (328Ft) / 200m (656Ft)
Weight per 100m (328Ft) roll		3.5Kg	5.1Kg

ELECTRICAL & MECHANICAL CHARACTERISTICS